[341] TIE Modify Removed Digit / Added Dial
Description
Assigns the removed digits and added numbers of a received TIE call. Digits are removed and
added from the beginning of the dialled digits.
Selection
• Location number: 01 through 32
• Number of digits to be deleted: 0 through 4 (0=no deletion)
• Number to be added: 4 digits (max.)
Default
All locations – Deleted digit=0; Added Dial=Blank
Programming
1.
Enter 341.
Display: TIE Remove/Add
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:0,
4.
Enter the number of digits to be deleted.
To change the current entry, press CLEAR and enter the new number.
5.
Press
6.
Enter the number to be added.
To change the current entry, press CLEAR and enter the new number.
7.
Press STORE.
8.
To programme another location, press NEXT or PREV, or SELECT and the desired
location number.
9.
Repeat steps 4 through 8.
10.
Press END.
Conditions
Each added number has a maximum of 4 digits, consisting of 0 through 9.
E & M Programming
to programme the number to be added.
4.3 TIE Line Routing Table Programming
301