[612] Incoming Call Display
Description
Allows you to choose between three display types when an incoming call is received.
Calling: The incoming caller's telephone number is displayed.
Called: The called telephone number is displayed.
Line Name: The outside line name assigned in the programme [417] Outside Line Name
Assignment is displayed.
Selection
• Jack number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all jacks)
• Display Types: Calling / Called / CO Line Name
Default
All jacks – Calling
Programming
1.
Enter 612.
Display: Incoming Display
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:Calling
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• To assign all jacks to one selection, press the
the contents programmed for jack 01.
General Programming
2.7 Extension Programming
key in step 3. In this case, the display shows
183