[211] Dial Start Time
Description
Sets the number of milliseconds the system waits before dialling after an outside line is seised.
Selection
Time (milliseconds): 0 through 40 (
Default
500 ms
Programming
1.
Enter 211.
Display: CO Dial Start
2.
Press NEXT.
Display example: Time: 500 msec
3.
Enter the time.
To change the current entry, press CLEAR and enter the new time.
4.
Press STORE.
5.
Press END.
Conditions
• You enter a number from 0 through 40. The actual time is a 100 times your input.
• You cannot leave the entry empty.
Features Guide References
Outside Line Access
General Programming
100 is the actual time)
2.3 Timer Programming
107