Pri Configuration - Panasonic KX-TD1232JT Programming Manual
Digital super hybrid system
Hide thumbs
Also See for KX-TD1232JT:
- User manual (242 pages) ,
- Features manual (232 pages) ,
- Programming manual (84 pages)
Table of Contents
Advertisement
3.3 ISDN Line Programming
[450] PRI Configuration
Description
Assigns the number of B channels which are actually used out of the 30 PRI line channels. The
CRC4 mode can be also assigned.
This programme is only available for the KX-TD1232 with the Primary Rate Interface ISDN
Expansion Unit (KX-TD290).
Selection
• B channel number: 0 through 30
• CRC4: Disable / Enable
Default
B channel number – 0 line; CRC4 – Enable
Programming
1.
Enter 450.
Display: PRI Config.
2.
Press NEXT.
Display example: Use: 0 Line
3.
Enter the number of B channels.
4.
Press STORE.
5.
Press NEXT to assign the CRC4 mode.
Display example: CRC4:Enable
6.
Keep pressing SELECT until the desired selection is displayed.
7.
Press STORE.
8.
Press END.
Conditions
If the available number of B channels are not assigned as "0 Line", outside lines 13 through 24
will become "No Connect", and the assigned B channel numbers of outside lines starting from
outside line 25 will become "Connect" automatically in programme [400] Outside Line
Connection Assignment.
For example, if the B channel number is assigned as "3", outside lines 25 through 27 will
become "Connect".
Features Guide References
None
266
ISDN Programming
Advertisement
Table of Contents
