3.1 Manager Programming
Conditions
• A centralised telephone is a telephone connected to jack 01 or a jack programmed as a
manager extension in programme [006] Operator / Manager Extension Assignment.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
• The number of the CO buttons available depends on the telephone type. (Refer to Buttons
on Proprietary Telephones and Consoles in the Features Guide.) To programme 24 CO
buttons, use the proprietary telephone, KX-T7220 or KX-T7230. For the KX-T7500 series
telephones, 24 CO buttons can be programmed by adding 12 CO buttons by connecting the
KX-T7545 Add-on key Module.
• If you press the same CO button again in step 5, you can select a desired ringer frequency
for the CO button from eight types of ring tones. When you enter the tone type number (1
through 8), you will hear the selected tone type until STORE is pressed. This selection is
possible only for the CO buttons that have been assigned to Single-CO, Group-CO, or
Loop-CO.
Features Guide References
Button, Flexible
Buttons on Proprietary Telephones and Consoles
224
ISDN Programming