4.5 Resource Programming
4.5 Resource Programming
[811] DISA / TIE User Codes
Description
Assigns the Direct Inward System Access (DISA) and TIE User Codes and a Class of Service
(COS) to each code. The code COS determines the toll restriction level of the DISA and TIE
caller.
Selection
• DISA / TIE user code number: 01 through 32
• DISA / TIE user code: 4 through 10 digits
• COS number: 1 through 8
Default
Code 01=0001 – COS 8
Code 02=0002 – COS 8
:
Code 32=0032 – COS 8
Programming
1.
Enter 811.
Display: User Code
2.
Press NEXT.
Display: User Code NO?
3.
Enter a DISA / TIE user code number.
To enter user code number 01, you can also press NEXT.
Display example: 01:0001 C:8
4.
Enter a DISA / TIE user code.
To change the current entry, enter the new code.
5.
Press
6.
Enter a COS number.
To change the current entry, enter the new COS number.
7.
Press STORE.
8.
To programme another user code, press NEXT or PREV, or SELECT and the desired
DISA / TIE user code number.
9.
Repeat steps 4 through 8.
10.
Press END.
320
to programme COS.
E & M Programming