Programming
1.
Enter 020.
Display: PS Flexible Key
2.
Press NEXT.
Display: PS NO?
3.
Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display: PT-PGM Mode
4.
Press the CO button to be changed.
The display shows the button pre-assignment.
Display example: CO-01
5.
Enter the button code (plus parameter, if required).
To change the parameter, press CLEAR and enter the new parameter.
6.
Press STORE.
7.
To programme another CO button for the same PS, repeat steps 4 through 6.
To programme another PS, press SELECT and repeat steps 3 through 6.
8.
Press END.
Cancelling
1.
Perform the same procedures as steps 1 through 4 above.
2.
Enter 2.
3.
Press STORE.
4.
Press END.
Conditions
None
Features Guide References
Button, Flexible
DECT Programming
5.1 Manager Programming
335