Clip / Colp Number Assignment For Isdn Extension - Panasonic KX-TD1232JT Programming Manual

[618] CLIP / COLP Number Assignment for ISDN Extension

Description
Assigns a CLIP/COLP number for each ISDN extension port.
Selection
• Jack number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• CLIP/COLP number: 16 digits (max.)
Default
All ports – Not stored
Programming
1.
Enter 618.
Display: CLIP for I-EXT
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Not Stored
4.
Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Each CLIP/COLP number consists of 0 through 9.
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To assign all jacks to one selection, press the
the contents programmed for Port 01.
ISDN Programming
3.4 Extension Programming
key in step 3. In this case, the display shows
277