Table of Contents
Advertisement
C
Feature References
Operation Reference
—User Manual
C
O Line Connection Assignment
Description
Conditions
Programming References
Feature References
Operation References
C
O Line Connection Assignment – Outgoing
Description
Conditions
3-42
Features
Section 3, Features,
Calling Line Identification Restriction (CLIR)
CO Incoming Call Information Display
DPT Features,
CO Incoming Call Information Log Lock
CO Incoming Call Information Log Mode
Operator Service Features,
CO Incoming Call Information Log Lock Clear
This allows you to specify the CO lines connected to your system
to prevent an extension user from originating an outside call by
selecting a line which is not connected. An idle line is selected
from the connected ones when an extension user makes an
Automatic Line Access.
If the user tries to make a call with a disconnected line, reorder tone
sounds to indicate that the line is out of use.
Section 4, System Programming,
[400] CO Line Connection Assignment
None
Not applicable.
Allows you to assign the CO line an extension user can use for
outgoing calls. This feature is useful to prevent unauthorized toll
calls.
• When an extension user tries to make an outside call on a disallowed
CO line, reorder tone is sent to indicate that the user cannot use the CO
line.
• Day and Night Service are individually programmed. (Night Service)
3
Features
Advertisement
Table of Contents
