Panasonic KX-TD1232JT Programming Manual page 390

Programme
[809] DISA Security Type
[810] DISA Tone Detection
[811] DISA / TIE User Codes
[812] DISA DTMF Repeat
[813] Floating Number Assignment
[814] Modem Standard
[815] SMDR Output Mode
[817] KX-TD197 Baud Rate Set
[818] DISA Built-in Automated Attendant
Number
[990] System Additional Information
[991] COS Additional Information
3 ISDN Programming
Programme
[005] Flexible CO Button Assignment
[012] ISDN Extension Number Set
[013] ISDN Extension Name Set
390
Trunk
Enable
Code 01=0001 – COS 8
Code 02=0002 – COS 8
:
Code 32=0032 – COS 8
Dial and Call – Repeat
Pager 1=196; Pager 2=197; Pager 3=296; Pager
4=297; DISA 1=198; DISA 2=298; MODEM=299;
DTA=199; E-Grp 1=191; E-Grp 2=192; E-Grp
3=193; E-Grp 4=194; E-Grp 5=291; E-Grp 6=292; E-
Grp 7=293; E-Grp 8=294
CCITT
Regular
V.34-33600
Disable
See "Default" shown in the explanation table.
Bits 4, 3, 2 and 1: All COS – 0000 / Bit 5: All COS – 1
KX-TD816:
All jacks – CO buttons 1 through 8 = Single-CO 01
through 08; Ring tone type 2
Other CO buttons = Not stored
KX-TD1232:
All jacks – CO buttons 1 through 24 = Single-CO 01
through 24; Ring tone type 2
All ports – Not stored
All ports – Not stored
Default
Default
Default Values