Clip / Colp Number Assignment - Panasonic KX-TD816E Installation Manual

4.8 Extension Programming

CLIP / COLP Number Assignment

Description
Selection
Default
Programming
Conditions
Feature References
Selects the type of additional number to the CLIP and COLP
information when making and answering a call through an ISDN
line. You can select the type from one of the following:
DDI: Subscriber number + DDI number
None: Subscriber number + Optional number
• Jack number: KX-TD816 – 01 through 16, (-1 / -2)
KX-TD1232 – 01 through 64, (-1 / -2)
(-1 = first part, -2 = second)
• Types: DDI / Any number, 1 through 6 digits
All jacks – DDI
1. Enter 623.
Display: CLIP/COLP NO.
2. Press NEXT.
Display: Jack NO?→
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack
number.
Display example: #01-1:DDI
4. Press SELECT until the desired selection is displayed and
enter the number, if required.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or SELECT
and the desired jack number.
7. Repeat steps 3 through 6.
8. Press END.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master
System and 33 through 64 are for the Slave, if available.
Section 3, Features,
Calling / Connected Line Identification Presentation (CLIP / COLP)
System Programming
623
4-142.5