Moving The Printer - Xerox WorkCentre EC7856 User Manual

Maintenance

Moving the Printer

Always turn off the printer and wait for the printer to shut down. To turn off the printer, verify that
•
there are no jobs in the queue, then turn off the secondary power switch first. Wait 10 seconds after
the touch screen goes dark, then turn off the main power switch. For details, see
On and Off on page 37.
• Disconnect the power cord from the back of the printer.
• Keep the printer level to avoid spilling toner.
Note: When moving the printer over a long distance, remove the drum cartridges and toner cartridges
to prevent toner from spilling. Pack the printer inside a box.
CAUTION: Failure to repackage the printer properly for shipment can result in damage not covered by
the Xerox ® Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox
Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused by improper
moving. The Xerox
could vary outside these areas. Please contact your Xerox representative for details.
226 Xerox ® WorkCentre
User Guide
® Total Satisfaction Guarantee is available in the United States and Canada. Coverage
® EC7836/EC7856 Color Multifunction Printer
Turning the Printer
® Warranty, Service