Xerox WorkCentre EC7856 User Manual page 217

5. Remove any loose staples or other debris from inside the finisher.
6. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
7. Insert the front side of the new staple case into the staple cartridge (1), then push the rear side into
the cartridge (2).
8. Grip the staple cartridge by the orange handle and insert it into the stapler until it clicks to lock in
place.
9. Close the finisher front door.
Xerox ® WorkCentre ® EC7836/EC7856 Color Multifunction Printer
Maintenance
217
User Guide