Glass Top Removal; Left Front Element Removal; Left Rear Element Removal; Right Bridge Element Removal - Viking VESC530 Service Manual

Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless test
procedures require power to be connected. Discharge capacitor through a resistor before attempting to service.
Ensure all ground wires are connected before certifying unit as repaired and/or operational.

Glass Top Removal

Condition Requirements:
Control Panel Assembly Removed
1. Remove two screws and bracket from range.
2. Slide glass top forward to remove from six keyhole
screws.
3. Lift glass top from range.
4. Reverse procedure for installation.

Left Front Element Removal

Condition Requirements:
Glass Top Removed
1. Mark and disconnect four wires from left front
element.
2. Remove element and springs from two posts.
3. Reverse procedure for installation.
38

Left Rear Element Removal

Condition Requirements:
Glass Top Removed
1. Mark and disconnect fi ve wires from left rear element.
2. Remove element and springs from two posts.
3. Reverse procedure for installation.

Right Bridge Element Removal

Condition Requirements:
Glass Top Removed
1. Mark and disconnect nine wires from bridge element.
2. Remove element and springs from three posts.
3. Reverse procedure for installation.
©2009 Viking Preferred Service