Removal Of The Pcb - Daikin SUPER MULTI NX G Series Service Manual

SiUS12-928
1.3

Removal of the PCB

Procedure
Step
1. Removal of the control PCB
1 Remove the 1 screw of
the PCB, and unfasten
the 2 hooks.
2 Unfasten the hook of the
terminal board, and open
the terminal board.
3 Disconnect each
connector on the back of
the terminal board (S11,
HL, HN).
Removal Procedure
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Outdoor Unit – 2MXS18GVJU
Points
166