Daikin SUPER MULTI NX G Series Service Manual page 183

SiUS12-928
Step
5 Take off the putty, and
remove each thermistor.
6 Remove the wire
harnesses.
Removal Procedure
Procedure
Outdoor Unit – 2MXS18GVJU
Points
 Place the thermistor so that its
end comes up to the end of
the fixture.
 Be careful not to lose the clip
or fixture for thermistors.
 S90:
Outdoor temperature thermistor
(Blue)
Outdoor heat exchanger
thermistor (Gray)
Discharge pipe thermistor (Black)
 S92: Gas pipe thermistor
Room A (Black)
Room B (Gray)
 S93: Liquid pipe thermistor
Room A (Black)
Room B (Gray)
174