Installation
Repackage the Instrument and Accessories
Refer to the drawing on page 12.
Place the foam cap into the bottom of the shipping container. Note the
1.
orientation of the foam cap in the box.
Place the accessories box back into the shipping container.
2.
Place the reader inside the original plastic bag and carefully lower the reader into
3.
the two foam caps in the bottom of the box. Note the orientation of the reader
in the box.
Place two foam caps over the reader.
4.
Bundle the power cord and place it into the accessories box as shown.
5.
Place the power supply and USB cable in the accessories box.
6.
Close the top of the box and secure it with shipping tape.
7.
Agilent BioTek Epoch Instructions for Use
7201009I Revision C
Page 18 of 31
Agilent Technologies, Inc.