Maintenance; Warnings And Precautions - Agilent Technologies BioTek Epoch Instructions For Use Manual

Maintenance

Maintenance

Warnings and Precautions

Internal Voltage. Always turn off the power switch and unplug the power
-WARNING-
supply before cleaning the outer surface of the instrument.
Liquids. Avoid spilling liquids on the instrument; fluid seepage into
-WARNING-
internal components creates a potential for shock hazard or instrument
damage. If a spill occurs while a program is running, stop the program and
turn off the instrument. Wipe up all spills immediately. Do not operate the
instrument if internal components have been exposed to fluid.
Liquids. Do not immerse the instrument, spray it with liquid, or use a
-CAUTION-
dripping-wet cloth on it. Do not allow water or other cleaning solution to run
into the interior of the instrument. If this happens, contact Technical
Support.
Lubricants. Do not apply lubricants to moving parts. Lubricant on
-CAUTION-
components in the carrier compartment will attract dust and other particles,
which may cause the instrument to produce an error.
Potential Biohazards. Wear protective gloves when handling contaminated
-WARNING-
instruments. Gloved hands should be considered contaminated at all times;
keep gloved hands away from eyes, mouth, nose, and ears.
Mucous membranes are considered prime entry routes for infectious agents.
Wear eye protection and a surgical mask when there is a possibility of
aerosol contamination. Intact skin is generally considered an effective barrier
against infectious organisms; however, small abrasions and cuts may not
always be visible. Wear protective gloves when handling contaminated
instruments.
Agilent BioTek Epoch Instructions for Use
7201009I Revision C
Page 20 of 31
Agilent Technologies, Inc.