Triumph Street Triple R Owner's Handbook Manual page 84

GENERAL INFORMATION
84
Display Setup - Units
The Units menu allows the selection of a
preferred unit of measurement.
To select
measurement:
From the DISPLAY SETUP menu,
▼
push the joystick up/down to select
UNITS.
Press the joystick center to confirm.
▼
To change the unit of measurement:
Push
▼
until the
highlighted
TEMPERATURE or PRESSURE).
Press the joystick center to confirm.
▼
Push the joystick up/down to select
▼
the required unit of measurement.
Press the joystick center to confirm.
▼
A tick is shown to indicate the
selected option.
The options available are:
DISTANCE/ECONOMY:
MILES & MPG (UK)
▼
MILES & MPG (US)
▼
KM & L/100KM
▼
KM & KM/L
▼
TEMPERATURE:
°C
▼
°F
▼
PRESSURE:
PSI
▼
MAIN MENU
UNITS
DISTANCE/ECONOMY
TEMPERATURE
PRESSURE
BACK EXIT SELECT
the required units
the joystick up/down
required option
(DISTANCE/ECONOMY,
BAR
▼
KPA
▼
Display Setup - Clock
The Clock menu allows the adjustment
of the clock to be set to the local time.
To set the clock:
From the DISPLAY SETUP menu,
▼
push the joystick up/down to select
CLOCK and press the joystick center
to confirm.
of
Push the joystick up/down to select
▼
between either 12 HR or 24 HR clock
and press the joystick center to
confirm. A tick is shown to indicate
the selected option.
The clock will display in either
▼
12 or 24 hour format. Once the clock
format is set, the display will return
to the CLOCK menu.
is
To set the time, push the joystick up/
down to select HOURS or MINUTES.
To adjust the hour setting:
Select HOURS on the display and
▼
press the
HOURS display will flash as shown
below.
Push the joystick up/down to set
▼
the hour. Press the joystick center
to confirm.
To adjust the minute setting:
To set the
procedure used to set the hour.
joystick center.
MAIN MENU
CLOCK
12 HR
24 HR
HOURS
MINUTES
15 : 53
BACK EXIT SELECT
MINUTES repeat
The
the