GENERAL INFORMATION
50
Bike Setup - Turn Signals
The
turn
Automatic or Manual mode.
Selecting a Turn Signals Mode
To select the required turn signals mode:
From the Bike Setup menu, press
▼
the
Up/Down
Indicators.
Press the Right button to view the
▼
available options.
Press the Up/Down button to scroll
▼
between the following options:
–
Automatic - The self-canceling
function is on. A short press
activates the turn signals for
three flashes. A longer press
activates the turn signals for
eight seconds and an additional
71 yards (65 meters).
–
Manual
function is off. The turn signals
must
using the turn signal switch.
Press the Select button to confirm.
▼
A tick is shown to indicate the
selected option.
signals
can
be
Automatic
Manual
button
to
-
The
self-canceling
be
manually
canceled
Bike Setup - Traction Control (TC)
set
to
The Traction Control (TC) system can
be temporarily disabled. The TC system
cannot be permanently disabled, it will
be automatically enabled when the
ignition is turned off and then on again.
To enable or disable the TC system:
From the Bike Setup menu, press
▼
the Up/Down button to select TC.
Press the Right button to view the
▼
available options.
select
Press the Up/Down button to select
▼
Enabled or Disabled.
Press the Select button to confirm.
▼
A tick is shown to indicate the
selected option.
Bike Setup - Service
The service interval is set to a distance
and/or time period.
To review the service interval:
From the Bike Setup menu, press
▼
the
Service.
Enabled
Disabled
Up/Down
button
to
select