Triumph Street Triple R Owner's Handbook Manual page 52

GENERAL INFORMATION
52
Trip Setup - Automatic Reset
To set the
automatically:
From the Trip Setup menu, press
▼
the Up/Down button to select Trip
1 Reset or Trip 2 Reset.
Press the Up/Down button to select
▼
Automatic.
Press the Right button to view the
▼
available options.
Press the Up/Down button to select
▼
the timer setting required.
Press the Select button to confirm.
▼
A tick is shown to indicate the
selected option.
The required time limit is then
▼
stored in the trip memory.
When the ignition is turned off, the
▼
trip meter is set to zero when the
time period has elapsed.
The following table shows two examples
of the automatic trip reset functionality.
Ignition
Turned Off
10:30 hrs
18:00 hrs
trip meter to
1 Hour
2 Hours
4 Hours
8 Hours
12 Hours
Trip Meter
Selected
Resets to
Time Delay
Zero
4 Hours 14:30 hrs
10:00 hrs
16 Hours
(next day)
Trip 2 Display
reset The Trip 2 Display menu allows the Trip
2 meter to be enabled or disabled. If Trip
2 is disabled, it will no longer be shown
in the information tray.
To enable or disable the Trip 2 meter:
From the Trip Setup menu, press
▼
the Up/Down button to select Trip 2
Display.
Press the Right button to view the
▼
available options.
Press the Up/Down button to select
▼
Enabled or Disabled.
Press the Select button to confirm.
▼
A tick is shown to indicate the
selected option.
Enabled
Disabled