Front Suspension; Front Suspension Settings - Triumph Street Triple R Owner's Handbook Manual

Hide thumbs Also See for Street Triple R:
Table of Contents

Advertisement

MAINTENANCE
166
Never attempt to dismantle any part
of the suspension units
All
suspension
pressurized oil.
Skin and eye damage can result from
contact with the pressurized oil.
Street Triple RS shown
To inspect the forks:
Position the motorcycle on level
ground.
While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
If roughness or excessive stiffness
is detected, consult your authorized
Triumph dealer.
Examine each fork for any sign of
damage, scratching of the slider
surface, or for oil leaks.
If any damage or leakage is found,
consult
dealer.
Warning
units
contain
an
authorized
Triumph

Front Suspension

Warning
Make sure that the correct balance
between front and rear suspension is
maintained.
Suspension
imbalance
significantly
change
characteristics
leading
motorcycle control and an accident.
Refer
to
the
tables
information or consult your authorized
Triumph dealer.
Warning
Make sure that the adjusters are set
to the same setting on both front
suspension units.
Settings that vary from left to right
may affect handling and stability
resulting in loss of motorcycle control
and an accident.

Front Suspension Settings

The motorcycle is delivered from the
factory with all the suspension settings
set at the Road (Solo Riding) setting,
as shown in the relevant suspension
settings tables. The Road suspension
settings provide a comfortable ride
and good handling characteristics for
general, solo riding.
The details shown in the tables are only
a guide. Setting requirements may vary
for rider and passenger weight and
personal preferences.
could
handling
to
loss
of
for
further

Advertisement

Table of Contents
loading

This manual is also suitable for:

Street triple rsStreet triple moto2 edition

Table of Contents