GENERAL INFORMATION
78
Bike Setup Menu
The
Bike
configuration of the different features
of the motorcycle.
To access the Bike Setup menu:
From the MAIN MENU, push the
▼
joystick up/down to select BIKE
SETUP.
Press the joystick center to confirm.
▼
Bike Setup - TSA (Shift Assist)
(if equipped)
Triumph Shift Assist (TSA) triggers a
momentary engine torque change to
allow gears to engage, without closure
of the throttle or operation of the
clutch. This feature works for both up-
shifts and down-shifts of gear.
The clutch must be used for stopping
and pulling away.
TSA will not operate if the clutch is
applied or if an up-shift is attempted by
mistake when in 6th gear.
Setup
menu
MAIN MENU
BIKE SETUP
TSA
INDICATORS
TC
SERVICE
BACK
EXIT
SELECT
It is necessary to use a positive pedal
force to make sure there is a smooth
allows
gear shift.
To enable/disable TSA:
From the BIKE SETUP menu, push
▼
the joystick up/down to select TSA
and press the joystick center to
confirm.
Push the joystick up/down to select
▼
ENABLED or DISABLED.
Press the joystick center to confirm.
▼
The display will then return to the
▼
BIKE SETUP menu.
For more information on Triumph Shift
Assist (TSA), see page 123.
Bike Setup - Turn Signals
The turn signals can be set to Auto
Basic, Auto Advanced or Manual mode.
Selecting a Turn Signals Mode
To select the required turn signals mode:
From the BIKE SETUP menu, push
▼
the joystick up/down to select
INDICATORS and press the joystick
center to confirm.
MAIN MENU
TSA
ENABLED
DISABLED
BACK
EXIT
SELECT
MAIN MENU
INDICATORS
AUTO BASIC
AUTO ADVANCED
MANUAL
BACK
EXIT
SELECT