The following table shows two examples
of the automatic trip reset functionality.
Ignition
Selected
Turned Off
Time Delay
10:30 hrs
4 HRS
18:00 hrs
16 HRS
Trip 2 Display
The Trip 2 Display menu allows the Trip
2 meter to be enabled or disabled. If Trip
2 is disabled, it will no longer be shown
in the information tray.
MAIN MENU
TRIP 2 DISPLAY
ENABLED
DISABLED
BACK
To enable or disable the Trip 2 meter:
From the TRIP SETUP menu, push
▼
the joystick up/down and then
press the joystick center to select
TRIP 2 DISPLAY.
Push the joystick up/down to select
▼
ENABLED or DISABLED. Press the
joystick center to confirm. A tick
is shown to indicate the selected
option.
Trip Meter
Resets to
Zero
14:30 hrs
10:00 hrs
(next day)
EXIT
SELECT
GENERAL INFORMATION
Display Setup Menu
The
Display
Setup
configuration of the different display
screen options.
MAIN MENU
DISPLAY SETUP
COLOUR
BRIGHTNESS (HIGH CONT.)
BRIGHTNESS (LOW CONT.)
VISIBLE TRAYS
GEAR SHIFT IND.
LANGUAGE
BACK
To access the Display Setup menu:
From the MAIN MENU, push the
▼
joystick up/down to select DISPLAY
SETUP. Press the joystick center to
confirm.
Select the required option from
▼
the list to access the relevant
information.
Display Setup - Color
To select a different color for the display
information:
From the DISPLAY SETUP menu,
▼
push the joystick up/down to select
COLOUR.
Press the joystick center to confirm.
▼
MAIN MENU
COLOUR
BACK
Push the joystick up/down to scroll
▼
between the four different colored
icons. There are four color options
available; blue, green, yellow and
white.
menu
allows
EXIT
SELECT
EXIT
SELECT
81