Push the joystick up/down to select
▼
AUTO BASIC, AUTO ADVANCED or
MANUAL.
–
AUTO BASIC - The self-canceling
function is on. The turn signals
will activate for eight seconds
and
an
(65 meters).
–
AUTO ADVANCED - The self-
canceling function is on. A short
press activates the turn signals
for three flashes. A longer press
activates the turn signals for
eight seconds and an additional
71 yards (65 meters).
–
MANUAL - The self-canceling
function is off. The turn signals
must
be
using the turn signal switch.
Press the joystick center to confirm.
▼
The display will then return to the
▼
BIKE SETUP menu.
Bike Setup - Traction Control (TC)
The Traction Control (TC) system can
be temporarily disabled. The TC system
cannot be permanently disabled, it will
be automatically enabled when the
ignition is turned off and then on again.
To enable or disable the TC system:
From the BIKE SETUP menu, press
▼
the joystick center to select TC.
Push the joystick up/down to select
▼
ENABLED or DISABLED.
MAIN MENU
ENABLED
DISABLED
BACK
additional
71 yards
manually
canceled
TC
EXIT
SELECT
GENERAL INFORMATION
Press the joystick center to confirm.
▼
The display will then return to the
▼
BIKE SETUP menu.
Bike Setup - Service
The service interval is set to a distance
and/or time period.
To review the service interval:
From the BIKE SETUP menu, push
▼
the joystick up/down to select
SERVICE.
Press the joystick center to view the
▼
Service information.
MAIN MENU
SERVICE
5450 mi
01-01-2024 (335 DAYS)
BACK
Trip Setup
The
Trip
Setup
configuration of the trip meters.
To access the Trip Setup menu:
From the MAIN MENU, push the
▼
joystick up/down to select TRIP
SETUP.
Press the joystick center to confirm.
▼
MAIN MENU
TRIP SETUP
TRIP 1 RESET
TRIP 2 RESET
TRIP 2 DISPLAY
BACK
EXIT
SELECT
menu
allows
EXIT
SELECT
79