Installing The Front Bezel; Figure 20. Removing The Front Bezel; Figure 21. Installing The Front Bezel - Intel Server System R1000GZ Service Manual

3. Rotate the front bezel anticlockwise to release the latches on the right end from the rack
handle (see letter "B").

Installing the Front Bezel

Note: Before installing the bezel, you must install the rack handles.
1. Lock the right end of the front bezel to the rack handle (see letter "A").
2. Rotate the front bezel clockwise till the left end clicks into place (see letter "B").
3. Lock the bezel if needed.
®®
Intel Server System R1000GZ/GL Service Guide

Figure 20. Removing the Front Bezel

Figure 21. Installing the Front Bezel

Hardware Installations and Upgrades
17