Table of Contents
Advertisement
Only cover the burner with one layer of coals. Arrange the ember chips
on top of the burner tray. DO NOT cover the pilot with logs.
WARNING: This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any additional
or alternative media, rock wool or other material in this appliance. The
use of additional or alternative materials may pose potential safety
hazards, damage to the appliance, and void manufacturer's warranty.
38" Birch Logset Installation
F
B
C
G
Step 1: Log A is placed at the rear center of the media tray
Step 2: Log G is placed in front of the pilot at the right end of log A
Step 3: Log B is placed at the right corner of the firebox, with the
charred side facing the middle of the media tray
XG0230 - 052020
D
E
A
Step 4: Log D is placed diagonally directly in front of log A
Step 5: Place log C at the left corner of the firebox, with the charred
side facing the middle of the media tray
Step 6: Rest log E horizontally on log B and over top of G
Step 7: Rest log F horizontally between logs D and E
Installation
DRSQ
38
43
Advertisement
Table of Contents
