Table of Contents
Advertisement
Only cover the burner with one layer of coals. Arrange the ember chips
on top of the burner tray. DO NOT cover the pilot with logs.
WARNING: This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any additional
or alternative media, rock wool or other material in this appliance. The
use of additional or alternative materials may pose potential safety
hazards, damage to the appliance, and void manufacturer's warranty.
38 Driftwood Logset Installation
G
F
D
E
Step 1: Log A is placed at the rear center of the media tray
Step 2: Log B is placed at the left corner of the firebox, with one end
resting on log A
Step 3: Place log C over the pilot with the end resting on log A
XG0230 - 052020
C
B
A
Step 4: Log D is placed in front of the pilot underneath log C
Step 5: Log E is placed diagonally directly in front of log B
Step 6: Rest log F on logs A and C
Step 7: Place log G underneath the end on log E with the other end
resting in the middle of the tray
Installation
DRSQ
38
47
Advertisement
Table of Contents
