Only cover the burner with one layer of coals. Arrange the ember chips
on top of the burner tray. DO NOT cover the pilot with logs.
WARNING: This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any additional
or alternative media, rock wool or other material in this appliance. The
use of additional or alternative materials may pose potential safety
hazards, damage to the appliance, and void manufacturer's warranty.
34 Driftwood Logset Installation
G
F
D
E
Step 1: Log G is placed at the left side of the media tray
Step 2: Log C is placed at the rear of the firebox, with one end resting
on log G
Step 3: Log B is placed in the right side of the firebox, resting the non
forked end on log C
46
C
B
NOT USED
A
Step 4: Log D is placed resting on log G.
Step 5: Log E is placed diagonally resting on log B
Step 6: Rest log F between logs C and B
Installation
DRSQ
34
XG0230 - 052020