Steps
1. Align the UltraSpeed Quad card with the expansion-card slot on the system board.
2. Remove the PCIe filler from the PCIe slot on the chassis.
3. Using the alignment post, connect the UltraSpeed Quad card to the connector and press down firmly. Ensure that the
UltraSpeed Quad card is firmly seated.
4. Close the PCIe door.
Next steps
1. Install the
air
shroud.
2. Install the
left-side
cover.
3. Follow the procedure in
Removing the Thunderbolt 4 PCIe card
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
After working inside your
Before working inside your
cover.
computer.
computer.
Removing and installing components
81