Rear Bezel; Removing The Rear Hard-Drive Bezel; Installing The Rear Hard-Drive Bezel - Dell Precision 7960 Tower Service Manual

6. Install the front I/O-bezel.
7. Install the top cover.
8. Install the front optical-drive and hard-drive
9. Install the front bezel.
10. Install the left-side cover.
11. Follow the procedure in

Rear bezel

Removing the rear hard-drive bezel

Prerequisites
1. Follow the procedure in
About this task
The following images indicate the location of the rear hard-drive bezel and provide a visual representation of the removal
procedure.
Steps
1. Slide down the release latch to unlock the bezel from the chassis.
2. Slightly pull the rear hard-drive bezel to release the bezel from the slots in the chassis.
3. Remove the rear hard-drive bezel from the computer.

Installing the rear hard-drive bezel

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
bezel.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 27