Removing The Rear 2.5-Inch Hard-Drive Assembly - Dell Precision 7960 Tower Service Manual

Steps
1. Slide and insert the 3.5-inch hard-drive assembly into the external flexbay slot.
2. Close the release latch to secure the 3.5-inch hard-drive assembly in place.
Next steps
1. Install the front hard-drive
2. Follow the procedure in

Removing the rear 2.5-inch hard-drive assembly

Prerequisites
1. Follow the procedure in
About this task
The following images indicate the location of the rear 2.5-inch hard-drive assembly and provide a visual representation of the
removal procedure.
46 Removing and installing components
bezel.
After working inside your
Before working inside your
computer.
computer.