About this task
The following images indicate the location of the UltraSpeed Quad card and provide a visual representation of the installation
procedure.
Steps
1. Align the UltraSpeed Quad card with the expansion-card slot on the system board.
2. Using the alignment post, connect the UltraSpeed Quad card to the connector and press down firmly. Ensure that the
UltraSpeed Quad card is firmly seated.
3. Close the PCIe door.
Next steps
1. Install the
air
shroud.
2. Install the
side
cover.
3. Follow the procedure in
Removing the Thunderbolt 3 PCIe card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
air
shroud.
About this task
The following images indicate the location of the Thunderbolt 3 PCIe card and provide a visual representation of the removal
procedure.
72
Removing and installing components
After working inside your
Before working inside your
computer.
computer.