Rear Fans; Removing The Rear System-Fan Assembly - Dell Precision 7960 Tower Service Manual

5. Connect the speaker cable to the speaker dongle-cable and route the speaker on the fan assembly.
6. Connect the fan cables to the connectors on the system board.
Next steps
1. Install the PCIe holder.
2. Install the air shroud.
3. Install the left-side cover.
4. Follow the procedure in

Rear fans

Removing the rear system-fan assembly

Prerequisites
1. Follow the procedure in
2. Remove the left-side
3. Remove the air shroud.
About this task
The following images indicate the location of the rear system-fan assembly and provide a visual representation of the removal
procedure.
Steps
1. Remove the two (6-32) screws that secure the fan assembly to the chassis.
2. Move the fan assembly at an angle from the chassis.
3. Disconnect the two fan cables from the connectors on the system board.
4. Lift and remove the fan assembly from the computer.
After working inside your
Before working inside your
cover.
computer.
computer.
Removing and installing components 67