Steps
1. Slide and insert the 2.5-inch hard-drive assembly into the external flexbay slot.
2. Close the release latch to secure the 2.5-inch hard-drive assembly in place.
Next steps
1. Install the
front hard-drive
2. Follow the procedure in
Removing the front 3.5-inch hard-drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
front hard-drive
About this task
The following images indicate the location of the external 3.5-inch hard-drive assembly and provide a visual representation of
the removal procedure.
44
Removing and installing components
bezel.
After working inside your
Before working inside your
bezel.
computer.
computer.