Steps
1. Position the front I/O-bezel to align the tabs on the bezel with the slots on the chassis.
2. Replace the single screw (M3) to secure the front I/O-bezel with the chassis.
Next steps
1. Install the
top
cover.
2. Install the
front optical-drive and hard-drive
3. Install the
front
bezel.
4. Install the
left-side
cover.
5. Follow the procedure in
Front I/O-board
Removing the front I/O-board
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
3. Remove the
front
bezel.
4. Remove the
front optical-drive and hard-drive
5. Remove the
top
cover.
6. Remove the
front
I/O-bezel.
7. Remove the
right-side
8. Remove the
air
shroud.
9. Remove the
front optical-drive and hard-drive inner
10. Remove the
PCIe
holder.
11. Remove the
front system-fan
24
Removing and installing components
bezel.
After working inside your
Before working inside your
cover.
cover.
assembly.
computer.
computer.
bezel.
bezel.