Removing The System Board - Dell Precision 7960 Tower Service Manual

System-board call outs (rear side)
Table 3. Precision 7960 tower system board callouts (rear side)
No
1
2
3
4

Removing the system board

Prerequisites
1. Follow the procedure in
NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup
program after you replace the system board.
NOTE: Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup
program. You must make the appropriate changes again after you replace the system board.
Connector
Front NVME0-1 (rear access)
Front NVME2-3 (rear access)
SATA 4-7 (rear access)
SATA 0-3 (rear access)
Before working inside your computer.
Removing and installing components
Description
Front NVMe connector for externally
facing M.2 flexbay drive
Front NVMe connector for externally
facing M.2 flexbay drive
SATA hard drive data-cable connector
SATA hard drive data-cable connector
109