Power-Distribution Board; Removing The Power-Distribution Board - Dell Precision 7960 Tower Service Manual

Steps
1. Insert the power-supply unit into the slot on the back of the chassis.
2. Slide the power-supply unit until the securing tab snaps into position.
3. Remove the screw from the unlock position and replace the screw into the lock position.
Next steps
1. Follow the procedure in

Power-distribution board

Removing the power-distribution board

Prerequisites
1. Follow the procedure in
2. Remove the right-side
3. Remove the power-supply
About this task
The following image indicates the location of the power-distribution board and provide a visual representation of the removal
procedure.
After working inside your
Before working inside your
cover.
unit.
computer.
computer.
Removing and installing components 91