Rear Fans; Removing The Rear-Fan Assembly - Dell Precision 5860 Tower Service Manual

Steps
1. Slide and insert the hard-drive cage into the slot on the chassis.
2. Install the four (#6-32) screws to secure the hard-drive cage to the chassis.
3. Connect the SATA power-cables and SATA data-cables to the connectors on the system board.
Next steps
1. Install the bottom air-shroud
2. Install the hard-drive fan
3. Install the 3.5-inch hard-drive
4. Install the 2.5-inch hard-drive
5. Install the air shroud.
6. Install the side cover.
7. Follow the procedure in

Rear fans

Removing the rear-fan assembly

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the air shroud.
About this task
The following images indicate the location of the rear-fan assembly and provide a visual representation of the removal
procedure.
54 Removing and installing components
assembly.
assembly.
assembly.
After working inside your
Before working inside your
computer.
computer.