Lights
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide
Removing the Front LED Board
NOTE:
The front LED board is embedded on the front panel. To remove the front
LED board, you must remove the front panel.
1 Follow the procedures in "Before You Begin" on page 9.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 13).
3 Remove the drive panel (see "Removing the Drive Panel" on page 53).
4 Release the four tabs that secure the front panel to the chassis.
5 Carefully, pivot the front panel away from the computer to release it from
the chassis.
105
Lights