Removing the front-panel light board
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
right-side
cover.
2. Remove the
front
cover.
Procedure
1. Lay the computer on the left side and disconnect the front panel light-board cable from the system board.
2. Remove the front panel light-board cable from the routing guides on the chassis.
3. Press the tab and disconnect the front light bar cable from the logo board.
4. Remove the screw (M3x5) that secures the front panel light-board to the chassis.
5. Remove the front panel light-board from the chassis.
38
Removing the front-panel light board
computer. After working inside your computer, follow the instructions in
25
After