Video Multiplexer Control - Panasonic WV-CU360C Operating Instructions Manual

Video Multiplexer Control

Some of the major functions equipped in a Video
Multiplexer are remotely controlled from the System
Controller. For more information, refer to the manual includ-
ed with the Video Multiplexer.
The operating procedures on the following pages assume
that you have selected a system unit and a monitor.
Multiscreen Selection
1. Press the MULTISCREEN SELECT button. The select-
ed multiscreen monitor displays a split screen.
MULTI SCREEN SELECT
2. Press the button repeatedly to select the number of
segments you wish the multiscreen to display. Each
time the button is pressed, the number changes as fol-
lows depending on the number of inputs (16 or 9).
16-input: 4 9
9-input: 4 9
Still Picture
There are two ways of displaying still pictures on the multi-
screen monitor.
8 Specific camera still
1. Select a camera number using the numeric buttons,
then press the STILL/– button. The selected camera
picture freezes on the multiscreen while the STILL/–
indicator is lit.
2. Press the STILL/– button to cancel still display mode.
29
Example of Quad Picture
1 2
3 4
16 4 screen segments
4 screen segments
STILL
–
8 All cameras still
1. Enter 0 with the numeric buttons, then press the
STILL/– button. All camera pictures freeze on the mul-
tiscreen while the STILL/– indicator is lit.
0
2. Press the STILL/– button to cancel the still display
mode.
Electronic Zoom
A picture displayed on the monitor can be electronically
zoomed in, and the enlarged area in the picture can be
moved using the joystick.
1. Press the EL-ZOOM/+ button. The EL-ZOOM/+ indica-
tor is lit, and a plus mark [+] appears in the center of
the monitor screen.
EL-ZOOM
+
2. Move the [+] mark into the zoom area moving the joy-
stick.
L
3. Press the EL-ZOOM/+ button again to zoom.
You can move the enlarged area on the monitor using
the joystick.
4. Press the EL-ZOOM/+ button to cancel the zoom mode.
The EL-ZOOM/+ indicator goes off.
STILL
–
UP
R
DOWN