Major Operating Controls & Their Functions; Front View (Template For Ps Data) - Panasonic WV-CU360C Operating Instructions Manual

MAJOR OPERATING CONTROLS & THEIR FUNCTIONS
Front View (Template for PS
!8
!9
@0
@5
@6
@7
@8
@9
#0
#1
#2
q Operate indicator (OPERATE)
Is lit while power is supplied to the System Controller.
w Login indicator (LOGIN)
Lights up when communication is established with
PS Data compatible system units.
•
e Alarm indicator (ALARM)
Blinks when an alarm is activated.
Blinking changes to steady light when the alarm is auto-
matically reset.
To turn the indicator off, press the Alarm Reset button.
r Monitor/Unit indicator (
When this indicator lights up, the monitor number is dis-
played. When it goes off, the unit address is displayed.
t LED Display
LED display allowing you to confirm the monitor or unit
number and the number of the currently controlled
camera.
It also displays numeric input, error status, etc.
The monitor or unit number is displayed when initial
communication is established.
10
q w e
OPERATE LOGIN ALARM
PROGRAM
SETUP CAM SETUP
SHIFT
FUNCTION CAM FUNCTION
ALM RESET ALM SUSPEND AUTO
ALM RECALL B/W
VCR CAM
MULTI SCREEN SELECT
DEF
AUX 2
STILL EL-ZOOM WIPER
– +
AUX 1
SEQ PAUSE SEQUENCE PATROL PLAY
SLOW
PATROL
PATROL
STOP LEARN
@4 @2
@3 @1
MONITOR/ UNIT)
Data)
•
r t y
MONITOR
CAMERA BUSY
UNIT
CLOSE
UNIT A
NEAR
UNIT
UNIT B
WIDE
MON CAM
HOME/PRESET
LOGOUT
ESC SET
PROGRAM
PRESET
!7 !6 !5 !4 !3 ! 2
y Busy indicator (BUSY)
Lights up when you attempt to control a system unit or
camera that is already used by a higher priority opera-
tor, or when a higher priority operator selects the cam-
era or system unit you are currently operating.
Operations from the System Controller are disabled
until this indicator goes off.
u Prohibited indicator (PROHIBITED)
Lights up when an attempt is made to access a function
that is prohibited to the operator level.
i Joystick Controller (UP/DOWN/L/R)
Used to manually operate the pan/tilt head, or move the
cursor in the setup menu on the active monitor screen.
The joystick can also be moved in 8 directions.
Holding down the joystick in the desired position will
keep the cursor moving continuously in the setup menu.
(See page 17.)
UP:
DOWN:
L:
R:
u i
PROHIBITED
System Controller
WV-CU
IRIS
OPEN
UP
IRIS RESET
FOCUS
FAR
AUTO FOCUS
L
ZOOM
TELE
DOWN
!1 !0 o
Upward
Downward
Left
Right
360
C
R