Panasonic WV-CU360C Operating Instructions Manual page 67

#2 Monitor/Monitor Lock/OSD service button
(MONITOR/OSD SERVICE), Lock indicator (LOCK)
Selects a monitor by entering a monitor number with the
numeric buttons, and then pressing this button.
To lock or unlock the currently selected monitor, press
this button while holding down the SHIFT button. While
the LOCK indicator is lit, other operators will be barred
from accessing the monitor.
To access OSD service, press the numeric buttons
shown below, then press this button.
1: ALMS, Alarm status
2: VLDS, Video loss detection status
3: SYS S, System status
4: ALM H, Alarm history
5: VLDH, Video loss detection history
69