Panasonic WV-CU360C Operating Instructions Manual page 30

Viewing Playback
VCR playback pictures are displayed on the selected spot
or multiscreen monitor.
1. With the connected VCR in playback mode, press the
VCR/CAM button to turn on the VCR indicator.
Playback pictures are displayed on the selected moni-
tor.
2. Press the VCR/CAM button again to cancel viewing
playback. The VCR indicator goes off.
Note: This function is automatic when PLAYBACK
AUTO is set to ON in the Video Multiplexer setup
and the playback signal is supplied to the Video
Multiplexer. Set PLAYBACK AUTO to OFF in the
setup when you wish manual operations as
described above.
Sequence Control
A preset sequence is displayed on the selected spot or
multiscreen monitor. The paused picture can be moved by
one step to the previous or next frame.
1. Press the SEQUENCE button. The sequence is dis-
played on the monitor while the SEQUENCE indicator is
lit.
2. To pause the sequence, press the SEQ PAUSE button.
3. To move the sequence one step forward, press the EL-
ZOOM/+ button.
30
VCR CAM
SEQUENCE
PATROL
STOP
SEQ PAUSE
SLOW
EL-ZOOM
+
4. To move the sequence one step back, press the
STILL/– button.
STILL
5. To cancel the sequence pause, press the SEQ PAUSE
button again.
SEQ PAUSE
–
SLOW