Alarm Recall - Panasonic WJ-SX550C Operating Instructions Manual

Examples of these modes are described below.
Alarm Mode 1: Any alarmed pictures are assigned to Monitor 1.
Mode 1 displays all alarms on Monitor 1.
If more than one alarm is activated, the system will sequentially display the alarms on Monitor 1.
1
Alarm Mode 2: Any alarmed pictures are assigned to four Monitors (1 - 4).
Mode 2 displays the first alarm on Monitor 1.
When the second alarm is received, the first alarm is shifted to Monitor 2 and the second alarm is displayed on Monitor 1
and so on.
This means, the latest alarm is always displayed on Monitor 1.
If more than four alarms are activated, the system will sequence the pictures starting with Monitor 1, then 2, etc.
Alarm Mode 3: Any alarmed pictures are assigned to any monitors.
Mode 3 is a fully programmable mode. Any alarm can be shown on any monitor, plus sequence routines, presets and aux-
iliary relays in receivers can be activated.

Alarm Recall

The WJ-SX550C Matrix Switcher can store up to 99 Alarm Logs in its memory.
The alarms may be recalled and displayed in chronological order on any desired monitor.
15
Alarm 1 2 3
A
A
5 6 7
Monitors
Alarm Alarm Alarm
A C E
Alarm Alarm
B D
1
ANY
5
Alarm
Alarm Alarm
4
A C
Alarm
8
B
1
A B F
E
5
Alarm
F
Any sequence, preset and auxiliary control
2 3 4
6 7 8
Any monitors
Sequence
1 2 3 4
A
B
C
5 6 7 8
Monitors
Sequence
2 3 4
C D
6 7 8
Monitors
W Z
X Y