Cpu Board - Panasonic WJ-SX550C Operating Instructions Manual

CPU Board

Appearance
q RS-232C Port (RS-232C)
This port is used to connect a personal computer that can store or load the memory in the WJ-
SX550C Matrix Switcher. This port also enables control of the Matrix Switcher with a personal
computer substituted for the WV-CU550C System Controller (by using optional software).
13
25
14
1
2
w Time Adjustment Input Connector (TIME ADJUST IN)
Accepts the time adjustment signal from a Time Lapse VCR. It enables the time display of
the WJ-SX550C Matrix Switcher and the Time Lapse VCR to be matched.
TIME
ADJUST IN
COM
1
2
e Printer Port (PRINTER)
This port is used to connect a parallel printer which can provide a print out of the System
Status, Alarm Recall or Setup operation data.
13
25
14
1
Note: If a printer is not used in the sys-
tem, pins 12-15 may be used for
displaying the system status on the
monitor screen (RGB type input).
24
Pin No. Designation
1 (FG)
2 SD PC
3 RD PC
4 RS
PC
5 CS PC
6 DR PC
7 SG
8 CD PC
20 ER PC
Other pins are not used.
Pin No. Designation
1 Signal
2 Ground
Pin No. Designation
1 /STROBE
2 DATA 0
3 DATA 1
4 DATA 2
5 DATA 3
6 DATA 4
7 DATA 5
8 DATA 6
9 DATA 7
10
11
12
13
14
15 (SYNC)
16
17 Not used
18 Not used
19 Ground
20 Ground
21 Ground
22 Ground
23 Ground
24 Ground
25 Ground
Direction
Switcher
Switcher
Switcher
Switcher
Switcher
Switcher
Switcher
Direction
Printer Switcher
Printer Switcher
Printer Switcher
Printer Switcher
Printer Switcher
Printer Switcher
Printer Switcher
Printer Switcher
Printer Switcher
/ACK Printer Switcher
BUSY Printer Switcher
(R) Monitor Switcher
(G) Monitor Switcher
(B) Monitor Switcher
Monitor Switcher
/PRIM Printer Switcher
CPU
RS-232C
q
TIME
ADJUST IN
COM
w
PRINTER
e
VS/VD
IN
r
OUT
t
y
VD
OUT