System Menu - Panasonic WJ-SX550C Operating Instructions Manual

System Menu

As shown below, the system menu allows access to six items.
To select an item from the System Menu:
1. Select the desired item by moving the Joystick Controller.
2. To execute the selection, press the CAM (SET) key.
The selected menu appears on the monitor.
3. To return to the Set Up Menu, press the MON (ESC) key.
Controller (Controller-Monitor Partitioning)
4
This table is used to prevent specific WV-CU550C System controllers from ever controlling the outputs of specific monitors.
This feature prevents an operator from unintentionally gaining control over a monitor that may not be associated with his/her
station.
e
To program or edit the Controller Table, do the following:
1. Move the cursor to position 3 by moving the Joystick Controller, then press the CAM (SET) key.
2. Move the cursor to the desired controller and monitor position by moving the Joystick Controller.
Press the INC +1CAM button or DEC –1CAM button repeatedly to select m or ].
m : Approval (OK)
] :
Prohibition (NG)
3. Repeat the above procedure until the table is completed.
4. After completing the table, press the MON (ESC) key to escape from the programming mode.
The cursor returns to position 3.
86
S e t U p S y s t e m
C o n t r o l l e r
E X T T i m i n g S e l e c t
C o m p e n s a t i o n / V D 2
R S - 4 8 5 S i t e C o m m u n i c a t i o n
C o m m u n i c a t i o n
S p e e d
C l o c k
F 1 : - - F 2 : - -
q w
S e t U p S y s t e m
C o n t r o l l e r
M o n i t o r
C T R L R 1
C T R L R 2
C T R L R 3
C T R L R 4
C T R L R 5
C T R L R 6
C T R L R 7
C T R L R 8
P C
F 1 : - -
F 3 : - - F 4 : - -
C T R L R
1 2 3 4 5 6 7 8 9
F 2 : - - F 3 : - -
1 0 1 1 1 2 1 3 1 4 1 5 1 6
. . O K
. . N G
F 4 : P o p U p