Panasonic WJ-SX550C Operating Instructions Manual page 17

System Controller-Monitor Partitioning
This feature is used to prevent specific WV-CU550C System Controllers from controlling the outputs of specific monitors.
It prevents an operator from unintentionally gaining control over a monitor that may not be associated with his/her station.
1
For example:
The following example demonstrates the use of both system controller-monitor partitioning and operator priority.
• Camera:
• Monitor:
• System Controller: 3 sets
• Operator :
Setting Procedure
1. Operator Number 1 has the first priority . Cameras 1-8 can be selected by Monitor 1.
2. Operator Number 2 has the second priority. Cameras 1-5 can be selected by Monitor 2 (limited access due to operator
partitioning).
3. Operator Number 3 also has the second priority. Cameras 4-8 can be selected by Monitor 3.
1
2
3
4
5
6
7
8
1. In the above system, when Operators 1 and 2 both select camera 3 simultaneously, the selection of Operator 1 is allowed
because Operator 1 has a higher priority.
2. Operator 2 can not select camera 6 because operator's partitioning limits access to cameras 1-5 by Operator 2.
3. Operator 2 can not control Monitor 3 because controller partitioning prevents access to monitor 3 by Operator 2.
18
1 2 3
550 550
System Controller WV-CU B System Controller WV-CU B System Controller WV-CU
System Controller Partitioning To Monitors
M1 M3 M5
M2 M4 M6
8 sets
3 sets
3 persons
Operator's
Priority
Priority 1
Operator 1
Controller 1
550
System Controller WV-CU B
M1
SPOT
WV-CU550C
4 5 6
550 550 550
B System Controller WV-CU B System Controller WV-CU B
M7 M9 M11
M8 M10
1
2
3
4
5
Priority 2
Controller
Operator 2
Partitioning
Controller 2
550
System Controller WV-CU B
M2
SPOT
7 8
550 550 550
System Controller WV-CU B System Controller WV-CU B System Controller WV-CU B
M13 M15
M12 M14 M16
Operator's
Partitioning
Priority 2
Operator 3
Controller 3
550
System Controller WV-CU B
M3
SPOT
4
5
6
7
8