Panasonic WJ-SX550C Operating Instructions Manual page 103

4. Press the STOP button to pause the sequence that is
being run on the active monitor.
P-Seq
Monitor 16
5. Press the FORWARD SEQ button to restart the
sequence forward from the step that was previously
paused by pressing the STOP button.
P-Seq
Monitor 16
6. Press the BACK SEQ button to restart the sequence
backward from the step that was previously paused by
pressing the STOP button.
5 5
P-Seq
Monitor 16
7. Press the INC +1CAM button to move the sequence
one frame to the next step (in forward or reverse run
direction) from the step that was previously paused by
pressing the STOP button.
P-Seq
Monitor 16
108
STOP
Stop
FORWARD
SEQ
BACK
SEQ
INC
+1CAM
Stop
8. Press the DEC –1CAM button to move the sequence
one frame to the previous step (in forward or reverse
run direction) from the step that was previously paused
by pressing the STOP button
-1CAM
P-Seq
Monitor 16
9. Press the FORWARD SEQ button while the ALT indi-
cator is on to restart the sequence forward from the
beginning of the sequence step that was previously
paused by pressing the STOP button.
FORWARD
SEQ ALT
10. To return to Spot monitoring, select a camera.
Refer to the Camera Selection.
DEC
Stop